linear rail
IDS linear guide rails

linear guide rails

YITONG IDS (Inlay Dual Shafts Guide System) consists of sliding carriage and rails.
The rails include an aluminum body and two pieces high precision﹑hardened linear shafts that are inlaid into the aluminum body.
The sliding carriage is mounted with three pieces or more high quality LFR series track rollers, two rollers are fixed on the block,  and others are all with eccentric functions.
IDS have a low coefficient of friction and good performance in high speed and high accelerations.
The guide rails and the carriage block are all drilled with mounting holes, easy for mounting.
IDS are easy to get a proper preload by adjusting the rollers with eccentric functions.
IDS have a long service life. Track rollers are available on stock for customers’ replacement.
Custom drilled services on the rails are also available from YITONG.

            IDS: Code of Inlay Dual Shafts Rails
            XX: Width of rail, e.g. 38 means the width 38 mm
            XXXX: Length of rail (mm)
            X: Number of rollers mounted on the carriage. 4 means 4 pieces (standard type is mounted 3 pieces of roller, not specified.)


Tel:+86 574 86303188 Fax:+86 574 86303168